Above we worked in pairs to create a short clip of someone walking through a door to heighten our understanding and fluency of the equipment, filming and the editing on Adobe Premier Pro CS6. We had to delve right into filming without planning so there are lots of improvements we could've made.
At first we had to set up. We decided on a basic set up of a DSLR Canon 1100D and a tripod. Due to not having used the tripod in such a long time we struggled to open it but soon realised that these models have locks to prevent unwanted movements that may occur during filming so after realising that we had to unlock the tripods segments we developed a better understanding. We soon started to comprehend the different knobs and levers and what they controlled such as height, landscape or portrait orientation and tilt. It had also been a while since we had filmed with the DSLR Canon 1100D so therefore struggled to set up this as well. Although we pressed the film button on the back we started to shoot by pressing the shutter button and didn't have the knob turned to the movie setting but the TV setting, so therefore images were being taken rather than videos.
Above are all the images that we took while trying to take a video before we realised that we had the wrong settings.
As we had such a short time to shoot we had no opportunity to check the location for anything that could cause any problems during filming which meant that we never noticed the reflection in the mirror of the lift, which ruins the professionalism of the video and makes the viewer aware of the whole process of filming and editing which taints the idea of continuity editing as it draws attention to the process, also during a shot in the lift and outside the lift a reflection is visible which although it isn't as clear as the mirror inside the lift it does have an effect and can possibly draw some attention towards the process, therefore making it not as effective as it doesn't give the viewer the experience as if they're there as they are aware that this is now all composed rather than a snapshot. For this reason I will need to do a proper location scout to make sure that none of this can happen as it can blemish my music video.
Above is the camera reflection before editing which depicts the camera as obvious and although after editing it can be seen it isn't as evident after using continuity editing to cover it up. Due to it being less palpable it is less likely to be noticed, therefore less likely to ruin the effect.
As well as not being able to scout the locations as well as we would've wished this meant that the second door we used couldn't have been done in as much detail as we would've aspired to have. For example the second door was a main access point for the library so therefore we couldn't be there for long periods of time and pay as much detail as we would've preferred to produce a more fluent and intricate progression to the video. A piece of detail that we could've added was a match on action or a graphic match due to the identical movement between the two doors. As well as this the second door was fitted with a sensor which prevented us from having control over the door and getting a detailed suitable close up, due to every time we tried to get close the door would try and open and then remain open.
Due to the span of shooting being over two days this allowed for controlled changes as Brandon was unshaven for the first part of filming but on the second day he was cleanly shaven, meaning this restricted use of camera angles from the front or the previous day of filming as this adjustment would be apparent. This makes me realise that to keep the conditions the same I will have to agree with the actor not to modify anything that would be distinct, as well as visible, and I will also have to try and get all my shots in as much time as possible to prevent these changes from affecting my music video.
Going back to the use of equipment, aside from the DSLR, we only had a tripod but this limited our lower shots of the feet so therefore the shots of the feet are being held freehand and not that level, still or precise, for this reason I will need to plan closely my shots as a circular stedicam was needed for this and might be needed for the my music video, if I had used a steadicam then the video would've appeared to have been more professional and fluent whereas the wobbly nature of the shot appears to be almost DIY and inefficient.
Above is the a print-screen from the wobbly shot of the feet.
When we returned from filming we began to edit but one thing that we did notice was that some shots weren't as in focus as we desired, when we used the DSLR we had it set on Auto focus which could've been the reason for this but the visual quality doesn't meet a great standard and gives an unprofessional taint. To find the cause of this I will experiment with focus on the DSLR's and try manual focus and different techniques to do with focus, but if I don't adjust and find the cause then this could mean the a load of footage from my music video could be shot but then be redundant due to the footage being out of focus.
Above is a shot that is out of focus, even though it's on the highest quality possible.
Another thing we noticed after returning from filming is that in some shots the tripod wasn't positioned level which therefore ruins the fluency and professionalism of the video, this can be altered on Adobe Premier Pro but I will have to research and develop my skills on how to do it, but generally the lesson learnt is that I should always check as the amount of time I could spend on trying the alter and tilt the video could be spent on something that would improve the overall quality, professionalism and narrative.
Above is a tilted shot due to the tripod not being level, I will have to refer to the spirit levels on the tripod to check when filming in future.
When we started to edit we wanted to introduce our video through text and title screens so we set three title screens up. Only they aren't level and they jolted around the screen a tiny bit which gives an unprofessional style to the opening and makes the viewer's expectations lower due to us not picking up on tiny details, I will have to research more on Adobe Premier Pro to see whether the method I used was the most effective or if there was another more professional method that could've been applied, or whether I will just have to pay more attention to detail in future.
Above are print screens of the opening titles, which we were inspired by the opening credits on other music videos such as;
These come from a range of genres, including singer/songwriter (Nina Nesbitt), which prove that these are popular ways to introduce a song and is quite common and I prefer these techniques over our just simple black background, I will research on how to produce these fluent title sequences as these are considerably more effective than a black screen as they can set the scene and be paired with an establishing shot to set the tone of the music video.
Below is how I added our black background credits and title:
Above I added a title.
Above I added a title and repeated this three times to present the title sequence.
To get all the shots we needed we had to repeat parts, for example the walking to get the feet moving, but this meant that Brandon walked at different paces to each footage so I had to slow down and speed up parts so it would look like he had only walked once as part of continuity editing.
Above I changed the speed/duration from 100% to 150% to increase the speed of the footage to produce one consistent pace.
I also learnt how to add music to footage using the programme Adobe Audition by ripping the track from the CD and then putting it into Adobe Premier Pro. I feel that the music matches the edit and adds a positive vibe due to the use of a positive key. Although one way I could've improved is by adding a fade to the music so the ending isn't so abrupt.
Another thing I learned was how to export the movie as a Windows Media file so that it would upload to YouTube.
I then progressed to upload it to YouTube
No comments:
Post a Comment